זה (לא) מסתובב

-סבתא, יש לך פטיפון?

-בטח, הנה פה למעלה, תוריד את זה זה בטח לא עובד קח תתקן את זה.

patephon_t.JPG

זה הדבר הכי רטרו שראיתי בחיים שלי!
באותו רגע כשהרמתי את המכסה היה לי ברור שגם אם זה לא מנגן, אני תולה את זה כמו שזה על הקיר.

 

הרמקול פנימי ובא כחלק מהפטיפון, שמוגבר על ידי שפופרות ואקום שצריכות להתחמם.

נתנו להם זמן להתחמם, שמנו תקליט שהיה לסבתא (גאולה גיל שרה שירים לאחר מלחמת ששת הימים), וזה לא מסתובב. סיבוב ידני נותן צליל – כך שאת כל תחום ההגברה זנחתי, וניגשתי למשימה, לברר למה זה לא מסתובב, ואיך אפשר לסדר את זה.

ראשית, צריך לפרק את כל הקונסטרוקציה:

The video cannot be shown at the moment. Please try again later.

במהלך הפירוק גם עקפתי את המתג שמפסיק את הסיבוב של הצלחת בזמן שהמחט נחה – לא צריך ניתוקים כרגע:

oops2.jpg

לאחר מכן, פירקתי את המנוע הקטן – אבא שלי ניסה להסביר לי שמנועים חשמליים פשוט לא עובדים אחרי 50 שנים, אבל סברתי אחרת.
אחרי הפרדה בכח של שלל הרכיבונים, אותרה גולת גריז קדמונית שהתגבשה לכדי דונג. לאחר כעשר דקות של מאבק, זה יצא, ושמתי שם קצת גריז, מהגריז שיש לנו בבית מאז שדוד שלי דפק את זה מהספינה שלו קצת לפני מלחמת יום כיפור.

עוד איזה שעתיים של מריבות, ולבסוף הסתבר שהמתג שהוצאתי מהמקום בזמן הפירוקים ולא החזרתי, היה נותן קונטרה על המכניקה של המחט, והיה קריטי בחיבור שבין המנוע לצלחת.

אז חיברתי חוט לבן במקומו, וצריך למשוך אותו כדי שיסתובב – אבל זה הסתובב!

שמח וטוב לבב, שמתי אידית פיאף על הצלחת, וצילמתי כדי שכולנו נראה (רמז, אין פה סוף טוב, ושימו לב ליד שמושכת את החוט):

The video cannot be shown at the moment. Please try again later.

מסתבר שאיבדתי איזה חלק קטן שגרם לבורג שבתחתית הצלחת להחזיק אותה במקום באופן שבו היא גם יכולה להסתובב. מה שקורה כרגע זה שהסיבוב עם כיוון השעון הולך ונועל את האום על הבורג, וזה לא מסתובב.

ועוד שלוש שעות אני על האוטובוס לירושלים.

המשך יבוא!

Tags:

  1. avitalgloberman’s avatar

    איזה פוסט מקסים ומשוגע
    פריס…פריס..

    הגב

  2. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  3. hwMoD’s avatar

    [..YouTube..] Wow, thanks

    הגב

  4. Tzafrir Rehan’s avatar

    Wow, thanks

    הגב

  5. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  6. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  7. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  8. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  9. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  10. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  11. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  12. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  13. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  14. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  15. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  16. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  17. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  18. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  19. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  20. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  21. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  22. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  23. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  24. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  25. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  26. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  27. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  28. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  29. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  30. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  31. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  32. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  33. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  34. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper.  It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  35. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  36. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  37. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  38. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  39. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  40. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  41. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  42. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  43. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  44. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  45. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  46. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  47. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  48. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  49. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  50. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  51. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  52. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  53. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  54. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  55. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  56. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  57. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  58. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  59. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  60. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  61. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  62. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  63. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  64. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  65. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  66. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  67. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  68. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  69. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  70. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  71. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  72. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  73. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  74. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  75. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  76. Intersonus903’s avatar

    [..YouTube..] The speed problem is likely due to the rubber idler tire slipping.

    This turntable is an idler drive, where a tire runs against the inner wall of the platter and a motor shaft.

    If the rubber is still in good condition, you can attempt to resurface the tire by abrading the contact surface with fine sandpaper. It would also not hurt to clean the inner wall of the platter and the motor shaft.

    הגב

  77. hwMoD’s avatar

    [..YouTube..] Wow, thanks

    הגב

  78. hwMoD’s avatar

    [..YouTube..] Wow, thanks

    הגב

  79. Tzafrir Rehan’s avatar

    [..YouTube..] Wow, thanks

    הגב

  80. Tzafrir Rehan’s avatar

    [..YouTube..] Wow, thanks

    הגב

  81. vivalaskeek’s avatar

    Lol. That actually makes it sound kind of cool.

    הגב

  82. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  83. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  84. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  85. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  86. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  87. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  88. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  89. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  90. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

  91. vivalaskeek’s avatar

    [..YouTube..] Lol. That actually makes it sound kind of cool.

    הגב

Reply

האימייל לא יוצג באתר. שדות החובה מסומנים *

titassite